Skip to content
Brisbane · Brisbane City Council · 4032

Solar installers Chermside

Post-war brick and tile on flat northside blocks: Chermside is straightforward solar country with big, simple roofs.

  • 30-year workmanship
  • NETCC approved
  • QLD #88205-licensed
Chermside, QLD 4032
Postcode
4032
Council
Brisbane City Council
Network
Energex
From our Ormeau depot
60 km · ~60 min
Wind region
Region B, non-cyclonic
Sun-hours per day
5.2 avg
STC zone
Zone 3 (1.382)
Solar in Chermside

What makes Chermside different

Chermside is Brisbane's northside hub, 10 km from the city around Westfield and the hospital precinct. Away from Gympie Road the streets are 1950s to 1970s brick homes on flat, regular blocks, with a growing number of townhouses and unit developments. The roofs are large, low-pitched and mostly unshaded, which makes for quick, high-yield installs.

Why it works here
  • 2,060 solar systems installed in postcode 4032, with 114 added in the year to July 2026
  • New systems in 4032 averaged 9.8 kW last year, sized to match ducted air and pools
  • Flat, low-pitched tile roofs give 20 plus panels on a single north or west face
  • Battery uptake in 4032 hit 174 installs in the 12 months to July 2026
  • Chermside is 60 km from our Ormeau base, an easy same-week install run
Real install data

What postcode 4032 has already put on its roofs

Every accredited solar and battery install in Australia is registered with the Clean Energy Regulator by postcode. These are the numbers for 4032, which covers Chermside.

Systems in 4032
2,060
Added in the last 12 months
114
Average new system
9.8 kW
Batteries, last 12 months
174

Source: Clean Energy Regulator, postcode data for small-scale installations, data as at 31/07/2026. Counts are for the whole postcode, and the last 12 months will still rise because installers have a year to register certificates.

Month by month

Chermside sunshine through the year

Twenty years of satellite-measured sunlight at the Chermside centroid, turned into the kilowatt-hours a 6.6 kW system would produce each month.

Best month
Nov
Lowest month
Jun
Winter low as a share of summer peak
44%
Annual output, 6.6 kW
10,538 kWh
Hottest month, average max
40°C

Source: NASA POWER, MERRA-2 / CERES SYN1deg climatology, 20-year Meteorological and Solar Monthly & Annual Climatologies (January 2001 - December 2020). Output assumes a north-facing array and an 85% performance ratio.

Estimated kWh per month from a 6.6 kW north-facing array in Chermside
Monthly solar generation in Chermside: highest in Nov, lowest in Jun03006009001,300JanFebMarAprMayJunJulAugSepOct1,146NovDec
Run your numbers

Solar savings estimate for Chermside

Pre-loaded with Chermside's own sun-hours, Energex tariffs and a typical local home. Slide the bill to match yours.

Your inputs

Preset for a typical Chermside home: Family brick home with ducted air and pool. Adjust to match yours.

$800
$200$2,000
35%

Bigger roofs and bigger bills make 10 kW the sensible default here. Pool pumps and daytime air conditioning give the array a load to feed.

10 kW in Chermside, 4032
5.2 sun-hrs/day · 32¢ buy · 6¢ feed-in
Annual generation
16,000 kWh
Annual saving
$2,400
Payback
4.1 yrs
25-year saving
$60,300
Share of your bill covered
75%
Indicative installed price
$10,000
Used at home / exported
5,592 / 10,386 kWh
STC rebate (Zone 3)
about 69 STCs, $2,691

Estimate only. Uses NASA POWER 20-year average sun-hours for Chermside, Energex tariffs from the 2026 Default Market Offer, a 85% performance ratio and 2026 installed prices after the STC rebate. STC value assumes $39 per certificate and a 5-year deeming period. Your roof, shading and quote will change the numbers.

Open the full calculator with 4032 filled in
Before you size a system

Can you export solar in Chermside?

Energex publishes how much solar each street transformer can still absorb. See the Chermside snapshot and check your own address in about ten seconds.

Check export limits
Roofs and homes

What we find on Chermside roofs

The typical Chermside house is a low-set brick home with a large hipped concrete tile roof. Those tiles are 50 or more years old in places, so we replace any we crack and check the sarking while we are up there. A 10 kW system fits comfortably on most of these roofs, usually across a north and an east or west face. Townhouse roofs are smaller Colorbond planes and take 6.6 kW cleanly.

Housing era
1950s to 1970s post-war homes, 2000s to 2020s townhouses and units
Roof material
Concrete tile on the houses, Colorbond on newer townhouses
Roof pitch
Low to moderate, 15 to 22 degrees
Typical block
Flat and regular, 550 to 700 m2
Home type
Detached brick homes and attached townhouses
Shading
Light, mostly street trees
What fits on the roof

Panel counts at 440 W per panel, about 2 m² each. We confirm the real count from satellite imagery before quoting.

SystemPanelsRoof area
6.6 kW15about 30 m²
10 kW23about 46 m²
13 kW30about 60 m²
Typical Chermside install

Family brick home with ducted air and pool: 10 kW, self-consumption around 35%.

Rules and rebates

What applies to a Chermside install

Council and network

Chermside has no character overlays to worry about, so panel placement is purely about yield. Energex is the network, with 5 kW export per phase on a standard connection and 10 kW per phase available on a dynamic connection. Newer townhouse complexes are community title, so panels on a shared roof need body corporate consent; we supply the drawings for that. Council allows solar on existing dwellings without a development application across the whole suburb.

STC rebate in Chermside

Chermside is in STC Zone 3 (rating 1.382). With a 5-year deeming period, a 6.6 kW system earns about 45 certificates, roughly $1,755 at $39 each, and a 10 kW system about 69, roughly $2,691. We claim it for you and take it off the quote.

Battery discount

The federal Cheaper Home Batteries Program cuts roughly 30 percent off the installed cost of a home battery, stepping down each year to 2030. Postcode 4032 added 174 batteries in the year to July 2026. We size the battery to your evening use, not the biggest unit on the truck.

Questions from Chermside

Asked by Chermside homeowners

Are old concrete tiles a problem for solar in Chermside?

Not usually. We use tile-replacement mounts or tile hooks, replace anything that cracks and photograph the roof before and after. If the tiles are badly weathered we will tell you before quoting.

Can I export 10 kW from a Chermside home?

On three-phase, yes. On single-phase Energex caps static export at 5 kW, but you can still install a 10 kW system with export limiting, or apply for a dynamic connection that lifts the cap when the network has room.

I live in a Chermside townhouse. Can I still get solar?

Yes, with body corporate approval for the shared roof. We draft the request with a layout drawing and an electrical schematic, which is what most committees want to see.

Coverage

Suburbs we cover near Chermside

Chermside is 60 km from our Ormeau depot, about 60 minutes by road, so our own crew does the install.

30.year
Workmanship warranty

30 year workmanship warranty

30.year
Panel warranty

30 year panel warranty

10.year
Inverter warranty

10 year inverter warranty

10.year
Battery warranty

10 year battery warranty

Ready when you are

Get in Touch Today!

Get a no-obligation quote from a real solar expert. Honest advice, no commission-only sales reps, no pushy follow-ups.